Panier
Le panier est vide.
Le panier est vide.
 | Pocket Wizard FlexTT5 (Nikon) Pocket Wizard-FLEX-N-CE FlexTT5 - Nikon Emetteur-Récepteur (CE 433MHz) Emetteur/Récepteur sans fil pour MiniTT1 en utilisant un signal TTL pour flash Nikon ( appareils incompatibles D1, D1x, D1h, D2h, D2hs, D2xs, D100, D70, D70s, tous les Coolpix et appareils photo argentiques et flashs incompatibles SB-80DX, SB-50DX, SB-28DX, SB-28, SB-26 …) 249.00 €Acheter Chez vous sous 4 à 5 jours Garantie : 1 an   |
Vérifiez la compatibilité du Flex TT5 (Nikon)
TTL Compatibility
Nikon i-TTL
Frequency:
340.00 - 354.00 MHz US FCC / IC
433.42 - 434.42 MHz CE
Channels:
52 Channels over 26 Frequencies (FCC/IC)
35 Channels over 5 Frequencies (CE)
Antenna:
2.7" (6.9 cm) rubberized with 180 degree swing
Transmit output power:
Less than 0.001 watt (1/1000 of a watt or 1 milliwatt)
Range Performance:
Up to 800 feet (10 to 240 meters) for i-TTL triggering depending on flash used, antenna orientation and other variables.
Up to 1200 feet (10 to 365 meters) for basic triggering depending on flash used, antenna orientation and other variables.
Mounting:
Hot Shoe, 1/4-20, lanyard, velcro
Maximum Shooting Rate Frames per second (fps)
TTL Mode: within 1 FPS of camera's maximum FPS
Basic Trigger Mode: Camera Max FPS
* dependent on flash power settings
FPS = Frames Per Second
Power / Channel Switch
OFF - C.2 - C.1
Zone Select Switch
A-B-C (matches Nikon zones)
Status Indicator
LED: Green, Amber, Red status indications
Camera / P1 Port
1/8" (3.5 mm) stereo miniphone for 2-stage remote camera triggering. Port Voltage Handling: up to 50 Volts, 100 milliamp continuous
Tip = Trigger
Ring = Pre-Trigger
Sleeve = Ground
Flash / P2 Port
1/8" (3.5 mm) mono miniphone. Port Voltage Handling: up to 200 Volts, 4 amps peak, 250 milliamp continuous, non-polarized
Minimum Receive Contact Time
Camera / P1 Port = 80 milliseconds
Flash / P2 Port = 500us
Voltage Present
3.3 VDC (all pins) - safe for all cameras
Hot Shoe voltage protection:
Hot Shoe: up to 50V
USB:
USB Compliant 2.0, Mini-B Connector, 5VDC regulated, 100mA, Pin 1 Positive, Pin 4 Ground
Operating Temperature
Above -15° C (5° F) and below 50° C (120° F).
Storage Temperature (without battery)
Above -30 C (-22 F) and below 85 C (185 F)
Construction
High impact plastic, captive battery door
Hot Shoe made of glass reinforced resin
Power
Two (2) AA (IEC:LR6) Alkaline recommended, other chemistries (NiMH, NiCAD, Lithium) allowed, USB
Battery Life
60 + Hours
Dimensions
3.6" (9.2 cm) long x 2.9" (7.3 cm) wide x 1.4" (3.6 cm) tall, antenna lowered
Weight
5.4 oz (153 grams) 3.8 oz (108 grams) without batteries
Included in the box
FlexTT5 Transceiver, USB cable, Two (2) AA batteries, Quick Guide
ROHS Compliant
TTL Compatibility
Nikon i-TTL
Frequency:
340.00 - 354.00 MHz US FCC / IC
433.42 - 434.42 MHz CE
Channels:
52 Channels over 26 Frequencies (FCC/IC)
35 Channels over 5 Frequencies (CE)
Antenna:
2.7" (6.9 cm) rubberized with 180 degree swing
Transmit output power:
Less than 0.001 watt (1/1000 of a watt or 1 milliwatt)
Range Performance:
Up to 800 feet (10 to 240 meters) for i-TTL triggering depending on flash used, antenna orientation and other variables.
Up to 1200 feet (10 to 365 meters) for basic triggering depending on flash used, antenna orientation and other variables.
Mounting:
Hot Shoe, 1/4-20, lanyard, velcro
Maximum Shooting Rate Frames per second (fps)
TTL Mode: within 1 FPS of camera's maximum FPS
Basic Trigger Mode: Camera Max FPS
* dependent on flash power settings
FPS = Frames Per Second
Power / Channel Switch
OFF - C.2 - C.1
Zone Select Switch
A-B-C (matches Nikon zones)
Status Indicator
LED: Green, Amber, Red status indications
Camera / P1 Port
1/8" (3.5 mm) stereo miniphone for 2-stage remote camera triggering. Port Voltage Handling: up to 50 Volts, 100 milliamp continuous
Tip = Trigger
Ring = Pre-Trigger
Sleeve = Ground
Flash / P2 Port
1/8" (3.5 mm) mono miniphone. Port Voltage Handling: up to 200 Volts, 4 amps peak, 250 milliamp continuous, non-polarized
Minimum Receive Contact Time
Camera / P1 Port = 80 milliseconds
Flash / P2 Port = 500us
Voltage Present
3.3 VDC (all pins) - safe for all cameras
Hot Shoe voltage protection:
Hot Shoe: up to 50V
USB:
USB Compliant 2.0, Mini-B Connector, 5VDC regulated, 100mA, Pin 1 Positive, Pin 4 Ground
Operating Temperature
Above -15° C (5° F) and below 50° C (120° F).
Storage Temperature (without battery)
Above -30 C (-22 F) and below 85 C (185 F)
Construction
High impact plastic, captive battery door
Hot Shoe made of glass reinforced resin
Power
Two (2) AA (IEC:LR6) Alkaline recommended, other chemistries (NiMH, NiCAD, Lithium) allowed, USB
Battery Life
60 + Hours
Dimensions
3.6" (9.2 cm) long x 2.9" (7.3 cm) wide x 1.4" (3.6 cm) tall, antenna lowered
Weight
5.4 oz (153 grams) 3.8 oz (108 grams) without batteries
Included in the box
FlexTT5 Transceiver, USB cable, Two (2) AA batteries, Quick Guide
ROHS Compliant
